MD Srcew Retention is an extremely rapid anaerobic liqiud synthetic which cures on contact with metals without oxygen. Screw retention replaces conventional fixing methods such as cotters, lock washers and discs. The screw retention secures screws, nuts and stud bolts against loosening due to vibrations and seals at the same time. MARSTON-DOMSEL systems are functionally reliable even under the toughest conditions.
- High strengths
- High temperature resistance (up to 230°C)
- time and cost savings
- very short hardening times
- high functional reliability
- DVGW
Areas of application: Motor racing, engine construction, the automotive and motorcycle industries, tractor construction, the electrical industry, turbines and nuclear power stations, engineering, the lighting industry, transmission construction, the foodstuffs industry, gas and waterworks, pump construction, sanitary applications etc.
Application instructions: Treat threaded parts with MD quick cleaner before applying screw retention adhesive. Pre-treat the surfaces with MD Activator No. 11 when working at temperatures below 5°C. Remove cutting oil and washing lye residues with hot water. Use MD MGL.BS or similar for plastic parts.
|
MD MSS.520.290
low viscosity- high strength- heavy demountable For all screws with fine threads up to M5 | Fixture time: 10 - 20 minutes | color: green For recommended for the retroactive securing of bolts and screws. Capillary effect.
|
MD MSS.541.241
low viscosity - medium strength - demountable For all screws with threads up to M12 | Fixture time: 10-20 minutes | Color: blue
|
MD MSS.550.222
medium viscosity - low strength - easy demountable For all screws with threads up to M24 | Fixture time: 15 - 30 minutes | color: purpur Can be loosened again with normal tools. Suitable for adjusting screws, screws on maintenance openings and carburettor screws. For use on metals which may break during disassembly.
|
MD MSS.581.242
high viscosity - medium strength- demountable For all screws with threads up to M24 | Fixture time: 10-20 minutes | Color: blue
|
MD MSS.585.243 DVGW release | NSF release
high viscosity - medium strength - demountable For all screws with rough threads up to M36 | Fixture time: 10 - 20 minutes | Color: dark blue For all metal threaded connections. Prevents breaking off due to vibration on drives, motors etc. Slightly oil-tolerant. The bond can be loosened again with normal tools.
MD MSS.5850.2400K Anaerobics without hazard symbols and without risk- and safety phrases
medium strength - high viscosity For all screws with coarse threads up to M36 | Curing time-handling: 30-50 minutes | Curing time-functional: 6-12 hours Gap filling: 0,25 mm | Viscosity: approx. 2.500 - 4.500 mPa.s | Temperature resistance: -55°C bis +150°C
|
MD MSS.587.245
high viscosity - medium strength - demountable For rough threads up to M80 (3") | Fixture time: 15-30 minutes | Color: blue
|
MD MSS.641.270/1
medium viscosity - high strength - heavy demountable For all screws with threads up tos M20 | Fixture time: 10 - 20 minutes| Color: green for all metal threaded connections including passive materials such as high-alloy steel. For highly vibration-and shock-resistant threaded connections e.g. studs on engines or pumps etc.
MD MSS.6410.2700K Anaerobics without hazard symbols and without risk- and safety phrases
high strength - medium viscosity For all screws with coarse threads up to M20 | Curing time-handling: 20-40 minutes | Curing time-functional: 6-12 hours Gap filling: 0,15 mm | Viscosity: approx. 550 - 850 mPa.s | Temperature resistance: -55°C bis +150°C
|
MD MSS.642.272 DVGW release
high viscosity - high strength - heavy demountable For all screws with threads up to M30 | Fixture time: 20-40 minutes | Color: red
MD MSS.681.262 NSF release
high viscosity - high strength - heavy demountable For all screws with rough threads up to M36 | Fixture time: 10-15 minutes | Color: red
|
Packaging: bottles 10 g unit 12 Pcs. | bottle 50 g unit 12 Pcs. | bottle 250 g unit 6 Pcs. | pump dispenser 15 g unit 12 Pcs. pump dispenser 50 g unit 12 Pcs.
|