- Fills cracks and holes
- Universally applicable
- For on-the-spot repairs
MD MET is easy to apply. MD MET is high-strength and is temperature-resistant up to 120°C.
Application examples: Repairing incorrectly drilled boreholes, flaws and all cracks in metal, wood and plastic. Mechanical working is possible after a short time. Parts can be ground, milled, bored and painted over.
Working instructions: The bonding surfaces must be clean, oil and grease free (e.g. with Marston Cleaner). Excellent results are obtained by a mechanical roughening of the adhesion surfaces. (50 g Insert the cartridge into the dispensing gun and then close.) Twist off cap, attach and tighten the mixing nozzle. Push the material out 50 g with the dispensing gun) and discard the first 2 g, as they are not yet mixed at 1:1. Setting time can be curtailed at high temperatures. Join work pieces together and fix. Store opened cartridge in a cool, dry place.Mechanical working is possible after 30 minutes. Final hardening occurs after 24 hours. Do not work at outdoor temperatures below 5°C. Replace the closure on the cartridge after use.
|